![]() ![]() Ensure that the vertical shaft is free to move and is supported by the spring beneath the weight pan.The nuts should only be tightened enough to level the plate. Do not overtighten the knurled nuts, as this will damage the top plate. Replace the three knurled nuts, then tighten in sequence until the built-in circular spirit level indicates that the top plate is horizontal.Using the spirit level attached to the top plate, level the cylinder by adjusting the feet.Replace the top plate on the transparent cylinder, but do not tighten the three knurled nuts.Connect the inlet tube to the quick-release connector on the bench.Replace the cylinder, and screw the 90-degree deflector onto the end of the shaft.Remove the top plate (by releasing the knurled nuts) and the transparent cylinder from the equipment, and check and record the exit diameter of the nozzle.Perform the experiment by taking the following steps: \)Ī YouTube element has been excluded from this version of the text.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |